SLAB FLATTENER MB200

Wood Slab Flattening Machine for Wide Slabs, Burls and Boards

Slab flattening mill with large capacity, powered cutter head directional controls with variable feed speed, cutter head with five carbide knives and orbital sanding head attachment.

DESCRIPTION

The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 1520 mm table extensions can be added to extend the material length.

Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 0,40 mm to 3,17 mm in 0,40 mm increments. The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use.

Powered controls include on/off, variable feed speed, and a joystick direction control for the X and Y axis for finishing material with or against the grain. The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 177 mm orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 101.6 mm (4″) diameter extraction port on top of the cutter head that can be connected to a dust extraction system.

FEATURES

2.9 kW (3.9 HP) Electric motor 3x400V

Heavy-duty welded steel frame

4 adjustable clamps

for material clamping.

8 adjustable leveling legs

with 76 to 83 cm adjustable table heigh.

Adjustable cutting depth

from 0.40 mm to 3.17 mm.

Control panel

features variable feed rate and On/Off switch.

Manual feed or powered cutter head directional controls

with variable feed speed.

Dual-Chain feed system

Standard 101.6 mm dust port

Orbital sanding head

(Random orbit sander head with velcro).

Cutter head

includes five 4-sided carbide knives.

Modular table sections

for easy shipping and extending.

VIDEOS

SPECIFICATIONS

POWER
Motor 2.9 kW (3.9 HP) Electric Motor – 16A 3x400V 50 Hz
CUTTING CAPACITY
Max. Milling Depth 3.2 mm
Min. Milling Depth 0.4 mm
Max. Material Width 1420 mm
Max. Material Length 3962 mm
Min. Material Length 558 mm
Max. Material Thickness 203 mm
Min. Material Thickness 12 mm

MOST-Kyiv, 08161 Ukraine, Kyiv, Kyiv-Sviatoshynskyi district, Tarasivka village, Kyivska 98-A St.

+38 067 312 22 13

mostkyiv21@gmail.com