Economic sawmill for heavy usage
The LX100 Twin Rail Sawmill is built for heavy and continuous sawmilling use.
With features designed to increase durability and efficiency, the LX100 is intended to meet and exceed customer requirements in demanding sawmilling environments.
The rigid xFRAME holds the control panel, the motor, and the sawmill head. Thick steel is used throughout the bed and the sawmill feet are bolted directly to the bed rails, reducing stress on the frame. Loading logs with a forklift is made easier with raised bed rails, reducing impacts from dropping or rolling the logs onto the sawmill.
At home sawing tropical hardwoods and other hard-to-cut and heavy timbers, the LX100 is designed to last longer than the competition, while remaining affordable.
The rigid, solid frame holds the control panel, the motor, and the sawmill head.
Thin-Kerf Wood-Mizer Blades
Cut hardwoods and softwoods with Wood-Mizer’s wide range of blades.
High Quality Blade Rollers
Fully adjustable and high quality guides manufactured by Wood-Mizer specifically for our sawmills.
Operator Control Panel
The sawmill controls are centrally located on the Operator Control Panel.
Standard electrical up/down increases operator productivity.
Just set a board size and with one button, the sawmill repositions automatically for each cut.
Clamp and Side Supports
The clamp is always held up out of the dirt, out of the way when not being used. The side supports on the LX100 are simple and stronger than ever.
Automatic Blade Lubrication
Activates when the blade is engaged, and turns off when the blades stops.
Optional Power Feed
The optional power feed system is driven on a heavy-duty chain, faster and more durable than other methods.
Optional Petrol Engines
For dependable power away independent of electrical availability.
Electric motors available in various options.
With the optional debarker to remove dirt and bark from the blade path, your blade sharp life is lengthened.
|Power||7.5 kW Electric
11 kW (E15) Electric
19 HP Petrol
25 HP Petrol
|Max. Log Diameter||70 cm
|Max. Log Length||5.4 m (2 segments 2.75 m each)
5.58 m (3 segments 1.85 m each)
8.10 m (3 segments 2.75 m each)
|Max. Width of Cut||64 cm|
|Max. Cant Width
|Max. Depth of Cut
|HEAD FEATURES AND OPTIONS|
|Setworks||SW10 (for AC models)|
|Head Up/Down||Electric (for AC models)|
|Blade Guide Arm
|Blade Tension System
||Screw with Gauge
|Sawdust Collection Port Diameter
||101.6 mm (4”)
|Blade Wheel Material||Cast Iron|
|BED FEATURES AND OPTIONS|
|Bed Construction||Twin Rail|
|Angled Bed Rails||N/A|
||Additional Bed Sections: 1.85 m or 2.75 m
|Manual||3 Side Supports
2 Manual Log Clamps
|SAWMILL FEATURES AND OPTIONS|