MULTIRIP BOARD EDGER EG300

Efficient, Multi-rip Edging

With both edger and multirip functions, maximise recovery from each board and increase sawmill productivity.

DESCRIPTION

The EG300 combines the functions of both an edger and a multirip into one machine. The EG300 maximises recovery from each board and increases overall productivity of your sawmill by 20-30%.

As standard, the EG300 is supplied with two circular sawblades for use as an edger. One blade is fixed and the other is adjustable from the operator control console – using the electronic Setworks system to accurately pre-set the required width of the board. Optional lasers can be installed to assist the operator in determining the precise width for maximum recovery.

The EG300 comprises three main components – the main saw unit, the infeed table and the outfeed table. This modular construction ensures easier transportation, handling and installation.

Two top rollers make it easy to move a board back to the front of the edger for a return pass. An adjustable fence allows the operator to quickly position boards with an already straight edge.

Optionally, the EG300 can be fitted with up to five circular sawblades for multirip applications. Four of the blades are fixed for cutting standard widths and the fifth is movable. Changing between edger and multirip operations is simple, and this flexible design allows the operator to react quickly to changing demand. Power feed is variable from 0-20 m/min.

FEATURES

MultiRip Blade Kit

Add three additional blades for full function multi-rip capability.

Standard Setworks

Uses rugged electronics to quickly position adjustable blade in accordance to required cutting width.

Electric motor

15 kW (18.5 kW optional)

Top rollers

Make it easy to return boards that require a second pass.

Adjustable Fence

Allows you to quickly position boards that already have one straight edge.

Powered Rollers

Full width steel rollers grip wet boards firmly without damaging the surface.

VIDEOS

SPECIFICATIONS

POWER SELECTIONS
Power Selections 8.5kW electric
15 kW (20 HP) Electric
18.6 kW (25HP) Electric
CUTTING CAPACITIES
Min. Width of Cut 20 mm (.75″) (multirip)
60 mm (2.36″) (edging)
Max. Material Thickness 60mm (2.36″)
BLADE
Blade Speed (RPM) 2940 RPM (50Hz)
3520 RPM (60Hz)
Number of Blades 2-5
Blade Diameter 350 mm (13.75″)
Blade Kerf 4 mm (0.16″)
Blade Adjustment Method Electric
Blade position Fixed on right side
FEED SYSTEM & OPERATION
Feed Speed 0-20 m/min (0-65 ft/min)
Board Kickback Prevention Anti Kick-back fingers
Board Alignment Optional Lasers
Straight Edge Board Fence Adjustable Board Fence
Material Hold-down Powered Steel Rollers
MultiRip Function Optional MultiRip
Operator Controls Stationary Control Station
Setworks Setworks
Feed System 4 powered rollers
Options Outfeed table
Cant outfeed tailer
MACHINE DIMENSIONS & REQUIREMENTS
Sawdust Collection Port Diameter 150 mm
Electrical Requirements 400V 50Hz 3Ph 40A
Safety Standards CE

MOST-Kyiv, 08161 Ukraine, Kyiv, Kyiv-Sviatoshynskyi district, Tarasivka village, Kyivska 98-A St.

+38 067 312 22 13

mostkyiv21@gmail.com