TWIN BLADE BOARD EDGER EG350
Large capacity twin-blade edger
Edge boards up to 100mm thick and maximise the productivity of your sawmill with this heavy-duty edger.
DESCRIPTION
The EG350 is a heavy-duty edger that can successfully produce edged boards from larger timbers up to 100mm thick and maximise the productivity of your sawmill.
Powered in-feed and out-feed belts move boards through the edger. The moveable control console includes a variable feed knob to adjust the feed rate from 0 up to 20m per minute, depending on the size of the boards being edged.
The EG350 is supplied with two circular sawblades that move in and out from the centre. Each 400mm cutting blade is powered individually by an 8 kW electric motor – providing lots of power for quickly processing thick hardwood slabs into finished boards.
FEATURES
Twin circular blades
Two 450mm blades move in and out from the centre of the machine.
Setworks
Quickly and precisely positions the blades for the correct board size.
Twin electric motors
2 x 8kW electric motors, one for each blade.
Laser
Assist the operator in accurately positioning the material for maximum recovery.
Powered feed belts
Two steel top rollers and in-feed and out-feed belts move boards through the edger.
Sawdust removal
Upper and lower sawdust outlets allow for comprehensive sawdust extraction.
SPECIFICATIONS
| POWER | |
|---|---|
| Power | 2 x 8 kW Electric |
| CUTTING CAPACITY | |
| Max. Material Width | 500 mm |
| Max. Width of Cut | 400 mm |
| Min. Width of Cut | 60 mm |
| Max. Board Thickness | 100 mm |
| Min. Board Thickness | 15 mm |
| Min. Board Length | 1100 mm |
| FEED SYSTEM | |
| Speed | 0 – 20 m/min |
| CIRCULAR BLADE | |
| Blade Adjustment | Electric |
| Diameter | 400 mm |
| Number of Teeth | 36 |
| Thickness | 4 mm |
| Number of Blades | 2 |
| Kerf | 4 mm |
| EDGER FEATURES AND OPTIONS | |
| Standards | CE |