The MP150 uses the same log bed as the LT15 sawmill, and they can be used together or separately. The MP150 head can be added to an existing LT15 sawmill and logs can be processed into a finished product without ever leaving the sawmill bed. After the log has been squared with the LT15 sawmill, the MP150 can then mould or plane it into the final product.

The MP150 model features electronic up/down and variable speed power feed. Optional setworks make the moulder/planer ideal for log home timber production.

Запис Moulder/Planer MP150 спершу з'явиться на MOST-Kiev.

The MP100 uses the same log bed as the LT15 sawmill, and they can be used together or separately. The MP100 head can be added to an existing LT15 sawmill and logs can be processed into a finished product without ever leaving the sawmill bed. After the log has been squared with the LT15 sawmill, the MP100 can then mould or plane it into the final product.

The MP100 model uses a manual crank system for adjusting the head height as well as moving the head along the track.

Запис Moulder/Planer MP100 спершу з'явиться на MOST-Kiev.

The spindle can be raised or lowered, and with a tiltable range of 270 degrees, the cutter or router bit can machine the board from below, the sides and from above – at almost any angle. You can mould one board on all four sides, as well as mould the ends of the board, and router holes into the surface – all with the MF130’s single spindle being uniquely configured for each operation.

Boards are passed through the machine with a sliding table, held down with included clamps, or they can be passed over the cutter manually. Additional options are available to expand the possibilities of the MF130 such as a multidirectional table, curved fences for making curved mouldings, and even a power feed.

When you need ultimate flexibility from one machine – the MF130 is the answer!

Запис Vertical spindle moulder MF130 спершу з'явиться на MOST-Kiev.

Запис Planer/Moulder MP365 спершу з'явиться на MOST-Kiev.

Запис Planer/Moulder MP360 спершу з'явиться на MOST-Kiev.

The MP280 is equipped with an intuitive control panel with the switches engaging all motors and the feed mechanism separately, allowing for lower energy consumption and noise emission. The 13,78 kW electric motors drive the cutter heads at 6000 rpm, ensuring the best possible finish of the board surface.

The MP280 features two horizontal cutter heads – the top shaft with a length of 410 mm and a diameter of 88 mm, while the bottom one 300 mm x 72 mm, and two side cutterheads (one in a fixed position and one moveable), which mould the material with a maximum height of 100 mm. Increased efficiency is possible due to 4-sided cutting in just one pass through the machine.

The feed mechanism has been incorporated from the bigger MP360 unit and comes with a variable speed of 3-15 m/min. The material feeds in and out of the machine on the 1,2m tables with protective steel curtains installed over the infeed entrance to prevent material throwback.

There are four sawdust exhaust ports – one with a diameter of 125 mm and three with 100 mm – and additional covers and brushes installed inside the machine to drive out the waste material from around the cutter heads as efficiently as possible. The MP280 planer/moulder is compatible with the Wood-Mizer MES dust extraction systems, which have been designed to keep the workplace clean and tidy.

Запис 4-sided Planer / Moulder MP280 спершу з'явиться на MOST-Kiev.

Запис Planer/Moulder MP260 спершу з'явиться на MOST-Kiev.

This moulder/planer/ripsaw machine combines these 3 important operations in one single unit, increasing productivity and therefore saving time. In addition to all Wood-Mizer Woodworking Machines, the MP220 is an ideal solution for sawyers and carpenters who want to process more timber in a relatively short time. The MP220 features two sawdust extraction ports (125 and 100 mm) on top of the main cover, and one (50 mm) under the cast iron table, helpful in keeping the work area clean.

Ripsawing is optimized for safety and ease of use. The ripsaw blade is hidden under the top cover and can be easily adjusted by the operator. With a maximum ripsawing height of 80 mm, feeding of material on a cast-iron table is smooth and secure. Over the feed table, there is a control unit, allowing for easy operation of the machine. The machine works with a set feed speed of 5 m/min (ECO version), or at a variable speed of 2-11 m/min (PRO version).

The MP220 machine is highly versatile, so it can turn every woodworking idea into a final product. It’s an indispensable tool for both amateurs and professionals who would like to make their own quarter rounds, floor decking, panelling, crown mouldings or wide floorboards. Most of these products can be made in one pass, while other, more advanced mouldings require 2 or 3 passes through the machine. The electrical motors provide the rotation speed of 6000 rpm, ensuring a smooth surface on the final products.

It has been designed, like all Woodworking Machines, as a high-quality and sturdy tool, built around a cast iron table, to ensure the precision of ripsawing and the best results of moulding/planing. Cutting knives offer the maximum depth of moulding at 20 mm. Maximum planing dimensions are 400 mm wide and 240 mm high.

Working with the MP220 can begin just after unboxing the machine, but it can be adjusted as required with the help of accessories available from the Wood-Mizer TOOLS range. It’s very easy to change the configuration of the cutterhead by adding knives or adjusting the blade for ripsawing. Its compact size, lightweight construction (240 kg) and optional transportation wheels make moving it around the workshop quick and effortless.

The MP220 is shipped on a small pallet (120 x 105 x 136 cm).

Запис Planer/Moulder/Ripsaw MP220 спершу з'явиться на MOST-Kiev.

You begin by planing or moulding one or two adjoining sides in one pass. The power feed rollers move the board under the horizontal cutter and past the vertical side cutter. If you are just planing, then you can simply flip the board over, adjust the table height, and then plane the final two sides.

If you are moulding a profile, then you simply need to change out the knives, adjust the table height and then mould the final two sides.

With the MP200, you can plane and mould timber in only two passes.

Запис Planer/Thicknesser MP200 спершу з'явиться на MOST-Kiev.