In its maximum six head configuration, the HR700 converts large cants into six boards and one slab in one pass. A separate control stand holds all controls for the resaw. Standard, head height is positioned with a manual screw. Optional Setworks with electric up/down are available, which increase speed and precision when adjusting the heads to produce different sized timber. Centralised blade tensioning for each two-head base makes the blade change process more efficient.

The twin-track steel belt conveyor provides a solid and durable surface that fully supports the entire cant width. Heavy, powered rollers stabilise and feed the cants through the heads during sawing. This makes it easier to process short cants or material with internal tension. A pneumatic sensor automatically raises the rollers to accommodate incoming cants. The roller speed is synchronised with the conveyor belt speed, providing more precise cutting, especially for thin boards.

The base HR700 module includes two heads as standard. To extend the resaw, all that is needed is to add another two-head module and install a longer conveyor belt. The modular design makes transportation easier and less costly, as well as giving businesses the option to scale up their resaw capability as their demands change.

Запис Horizontal resaw HR700 спершу з'явиться на MOST-Kiev.

Heavy-duty, accurate, and easy-to-use, the WM1000 features a massive cutting head that moves along a twin-rail frame to convert large logs into halves, quarters, finished boards, or cants for resawing. The operator controls all cutting functions while standing on a platform that moves with the head and includes electronic setworks for accurate cutting.

The WM1000 uses thin-kerf, narrow band blades that are 50 mm to 75 mm wide, resulting in significantly improved log yield and less wood waste.

Built to last and run effortlessly in industrial applications, it easily integrates into existing operations with low installation costs. Simply extend the rails to cut longer logs.

Запис Industrial sawmill WM1000 спершу з'явиться на MOST-Kiev.

The WM3500 requires only one operator to manage log handling, sawing, and remove finished boards for further processing. Powerful computer setworks, centralised controls, and heavy-duty hydraulic functions enable the operator to focus on producing quality timber at a high production rate.

The WM3500’s wide throat capacity cuts large diameter logs into boards or cants with help from the bidirectional chain turner, hydraulic toeboards, and heavy-duty log clamp.

The WM3500 uses thin-kerf, narrow band blades that maximise log yield and minimise waste and operational costs – increasing profits and competitiveness.

Запис Industrial sawmill WM3500 спершу з'явиться на MOST-Kiev.

Only one operator is needed to manage log handling, sawing, and timber removal for further processing making the WM4000 a highly profitable machine. The WM4000 adapts easily for whatever cutting requirements are needed and delivers higher log yield at lower investment and operating cost than alternatives, increasing profitability and ability to produce diverse products quickly.

The WM4000 can be used as a standalone sawmill to process all required materials, or as an addition to an existing sawmill to process irregular logs or to produce custom orders that existing equipment is not suited for.

The advanced PLC setworks are displayed on a 19 cm touch-screen monitor which presents board and cant sizes along with current head height, feed position, and blade power. The setworks feature new ways of increasing productivity and reducing steps required in the sawing process, including remembering the start and stop locations of the log to reduce unneeded head movement. A built-in powered board conveyor automatically turns itself off after moving a board or cant from the sawmill.

The log bed is heavily constructed – reinforced with 50% more steel than the WM3500. Servo motors ensure faster and accurate head positioning, resulting in more timber cut in each shift. Powerful hydraulic log handling enable easy manipulation of large logs and several options are available to meet your requirements.

Запис Industrial sawmill WM4000 спершу з'явиться на MOST-Kiev.

When placed in the SLP2 line following the TVS, the Single Horizontal Saw removes the third slab from the bottom of the log. The slab is removed automatically, and the three-sided cant continues on to the resaw. No cant turning occurs, which reduces labour requirments.

Запис SHS Single Horizontal Saw спершу з'явиться на MOST-Kiev.

The WM5500 can process logs up to 1 meter in diameter and is compatible with wide blades up to 120 mm, including Stellite-tipped options for superior cutting speed and finish. The sawhead supports 900 mm cutting width and height, with bed length configurations from 4.5 m up to 12 m to suit a variety of log sizes.

Key upgrades include a high-speed servo-driven head positioning system that halves the sawhead up/down movement time to just 5 seconds. A robust triple-row chain provides extra stability for moving the sawhead, while the new compressed-air blade lubrication system ensures consistent performance, especially for wider blades. The 45 kW motor provides additional power ideal for high-efficiency Stellite blades.

The WM5500 introduces customizable blade width options. Customers select their preferred blade width during ordering, which determines the configuration of blade wheels, guides, and wheel alignment. The advanced blade tensioning system can also be equipped with an electric pump for easier control from the operator cabin.

The redesigned operator cabin enhances ergonomics and functionality with an intuitive control interface, slanted monitors, joysticks, and an optional air-conditioning unit. Hydraulic operations have also been improved—faster for log loading, yet easily slowed for precision handling—thanks to a new bypass-based oil flow system.

The debarker and board removal system is now pneumatically controlled, offering smoother operation and easier maintenance. With an air gun included for cleaning the sawhead area, every detail has been considered to optimize performance and operator comfort.

From its powerful motor and wider blades to its upgraded electronics and control systems, the WM5500 delivers everything industrial sawyers need to boost efficiency, accuracy, and output.

Запис WM5500 Industrial Sawmill спершу з'явиться на MOST-Kiev.