INDUSTRIAL TWIN BLADE BOARD EDGER EG400

Extreme, Heavy-duty Edging

Rugged board edger for commercial businesses that require a fast, accurate, and heavy-duty board edger.

DESCRIPTION

The EG400 is a rugged board edger that is at home in commercial sawing businesses that require a fast, accurate, and heavy-duty board edger. The EG400 edges material 700mm wide by 100mm high at 30 metres per minute, and smaller material at up to 54 metres per minute.

The remote operator’s control console manages all edger functions, and can be repositioned as needed. The 22kW motor delivers plenty of power for softwoods and hardwoods. The edger automatically adjusts feed speed depending on the thickness of the board being cut. Two 400mm blades are mounted on a splined shaft and move in and out from the centre, allowing the use of an optional outfeed board conveyor.

Two lasers are standard on the EG400 for board positioning, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers. The standard infeed table is available with optional rip fences.

An optional tailer outfeed keeps the edged boards moving through the line, while enabling easy waste removal. Optional electronic setworks are available.

FEATURES

Optional Setworks

This option includes both the LED 2″ display and remote control.

Two Moveable Blades

Easily access both 16” blades which move in and out from center on a splined shaft.

Two Lasers

Two included standard lasers help to determine correct board position, increasing yield and grade.

VIDEOS

SPECIFICATIONS

POWER SELECTIONS
Power Selections 22 kW (30 HP) Electric
CUTTING CAPACITIES
Max. Width of Cut 72 cm (28″)
Min. Width of Cut 76 mm (3″)
Max. Material Thickness 100 mm (4″)
BLADE
Blade Speed (RPM) 2320 RPM
Number of Blades 2
Blade Diameter 400 mm (16″)
Blade Kerf 7 mm (9/32″)
Blade Adjustment Method Electric
Blade position Two Centered Blades
FEED SYSTEM & OPERATION
Feed Speed 100mm (4″) material: 13m/min (44 Ft/Min)
50mm (2″) material: 24m/min (78 Ft/Min)
25mm (1″) material: 34m/min (111 Ft/Min)
Board Reverse System Reverses feed rollers to eject jams
Board Kickback Prevention Anti Kick-back fingers
Board Alignment 2 Lasers
Material Hold-down Powered Steel Rollers
Operator Controls Stationary Control Station
Setworks Optional Setworks
Feed System Rubber Infeed & Outfeed Belts
Options Heavy-duty outfeed tailer
MACHINE DIMENSIONS & REQUIREMENTS
Width 1.6 m (64″)
Electrical Requirements 400V 50Hz 3Ph 70A
Safety Standards CE

MOST-Kyiv, 08161 Ukraine, Kyiv, Kyiv-Sviatoshynskyi district, Tarasivka village, Kyivska 98-A St.

+38 067 312 22 13

mostkyiv21@gmail.com